Agilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / Thermostat
Agilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / ThermostatAgilent 1200 Series HPLC G1330B FC/ALS Therm Autosampler Chiller / Thermostat
$2,600.00


Buy with confidence! This Thermostat is backed by our
BULLETPROOF 60-DAY WARRANTY


Agilent 1200 Series G1330B FC/ALS Therm HPLC Autosampler Chiller / Thermostat

Used but super clean and in excellent condition. We have 2 identical units. Both power on via connected ALS/FC.

Connected to Lab Advisor via our G1329 ALS. Installation and connection was perfect. Lab Advisor recognized the unit and showed ready state.

Cleaning and general service performed. Comes as shown and 1 power cable. Guaranteed functional. Hassle-free warranty.



Manufacturer Description

The Agilent 1200 Series autosampler is designed for use with other modules of the Agilent 1200 Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Agilent 1200 Series control module or from the Agilent ChemStation for LC systems.

The specially-designed thermostattable sample trays (not included) holds either 100 × 1.8 ml vials or two wellplates and 10 × 1.8 ml vials.

The autosampler thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially-designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how many vials are in the tray.

In cooling mode condensation is generated on the cooled side of the Peltier elements. This condensed water is safely guided into the leak system.