Cole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPM
Cole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPMCole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPMCole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPMCole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPMCole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPMCole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPMCole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPM
$389.00
Cole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPM - P/N 7592-90

Clean and in excellent condition. These were pulled from a working facility. All control interface functions and display menus work correctly. Comes wit attached wall mount brackets as shown. Last 2 photos show the 2 different serial numbers. Your purchase is for 1. Hassle-free warranty.

KEY FEATURES

  • Flow: 0.12 to 13 L/min (0.03 to 3.5 GPM); Flow rate depends on motor rpm and tubing size.
  • Motor and controller are connected by a 25-ft (7.6-m) cable. Place components where convenient.
  • Reversible 1/5-hp motor. Purge tubing before or after pumping; pump fluid in either direction.
  • Controls: start, stop, prime, reverse, calibrate, and dispense/copy. Input all pumping parameters through the membrane keypad.
  • Remote control capabilities. Speed control input: 0 to 20 mA, 4 to 20 mA, or 0 to 10V. Tachometer output: 0 to 20 mA, 4 to 20 mA, 0 to 10V, or TTL pulse. Pumping direction/start/stop: open collector or contact closure.
  • Four-digit LED display shows four different parameters: Flow rate (0.01, 1, 10 L/min; autoranging with tubing size); Dispense volume (0.1 to 999 liters); Copy (1 to 99 repetitions, 1.5 mL to over 1000 liters each); Motor rpm (1 rpm resolution).
  • Drive stores one user defined calibration value per tubing size. Calibrate manually to compensate for tubing variations or use the nominal calibrations stored in the nonvolatile memory.
  • ABS plastic controller housing is IP43 rated; motor is IP56 rated. Controller is protected from gentle spray from above; drive is protected from dust and strong jets of water.
  • 6-ft (1.8-m) line cord with plug—115 VAC: U.S. standard plug; 230 VAC: IEC320/CEE22 connector. 230 VAC model is shipped with country-specific plug/cord set, please specify destination when ordering.
  • Drive accepts two different pump head types: Standard or EASY-LOAD®

Specs
  • Pump Series: I/P
  • Control Type: Digital Variable Speed
  • Speed: Variable
  • Speed Control: ±0.3%
  • Max Flow Rate (mL/min): 17000
  • Min Flow Rate (mL/min): 120
  • Reversible Motor: Yes
  • No. of Pump Heads Accepted: 2
  • Type of Pump Heads Accepted: Standard, Easy-Load, High-Performance
  • Motor (watts): 150
  • Controller IP rating: IP 22
  • Motor IP rating: IP 34
  • Power (VAC): 90 to 130
  • Power (amps): 3
  • Controller Length (in): 9.75
  • Controller Width (in): 9.1875
  • Controller Height (in): 5.0625
  • Controller Length (mm): 248
  • Controller Width (mm): 233
  • Controller Height (mm): 129
  • Motor Length (in): 14.125
  • Motor Width (in): 5.5625
  • Motor Height (in): 6
  • Motor Length (mm): 359
  • Motor Width (mm): 141
  • Motor Height (mm): 152
  • Motor hp: 1/5
  • Description: I/P variable-speed modular digital drive, 20-650 rpm, 115V.