Cole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular Drive
Cole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular DriveCole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular DriveCole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular DriveCole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular DriveCole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular DriveCole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular DriveCole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular DriveCole Parmer Masterflex I/P Variable Speed 20-650 RPM Digital Modular Drive
$369.00
Cole Parmer Masterflex I/P Variable Speed Digital Modular Drive 20-650 RPM - P/N 7592-90

Clean and in excellent condition. Pulled from a working facility. All control interface functions and display menus work correctly. Has some paint or other similar material spots on the front cover but nothing that effect function. Comes with 20' long DB15 adapter cable for remote port and attached wall mount brackets as shown. Hassle-free warranty.

KEY FEATURES

  • Flow: 0.12 to 13 L/min (0.03 to 3.5 GPM); Flow rate depends on motor rpm and tubing size.
  • Motor and controller are connected by a 25-ft (7.6-m) cable. Place components where convenient.
  • Reversible 1/5-hp motor. Purge tubing before or after pumping; pump fluid in either direction.
  • Controls: start, stop, prime, reverse, calibrate, and dispense/copy. Input all pumping parameters through the membrane keypad.
  • Remote control capabilities. Speed control input: 0 to 20 mA, 4 to 20 mA, or 0 to 10V. Tachometer output: 0 to 20 mA, 4 to 20 mA, 0 to 10V, or TTL pulse. Pumping direction/start/stop: open collector or contact closure.
  • Four-digit LED display shows four different parameters: Flow rate (0.01, 1, 10 L/min; autoranging with tubing size); Dispense volume (0.1 to 999 liters); Copy (1 to 99 repetitions, 1.5 mL to over 1000 liters each); Motor rpm (1 rpm resolution).
  • Drive stores one user defined calibration value per tubing size. Calibrate manually to compensate for tubing variations or use the nominal calibrations stored in the nonvolatile memory.
  • ABS plastic controller housing is IP43 rated; motor is IP56 rated. Controller is protected from gentle spray from above; drive is protected from dust and strong jets of water.
  • 6-ft (1.8-m) line cord with plug—115 VAC: U.S. standard plug; 230 VAC: IEC320/CEE22 connector. 230 VAC model is shipped with country-specific plug/cord set, please specify destination when ordering.
  • Drive accepts two different pump head types: Standard or EASY-LOAD®

Specs
  • Pump Series: I/P
  • Control Type: Digital Variable Speed
  • Speed: Variable
  • Speed Control: ±0.3%
  • Max Flow Rate (mL/min): 17000
  • Min Flow Rate (mL/min): 120
  • Reversible Motor: Yes
  • No. of Pump Heads Accepted: 2
  • Type of Pump Heads Accepted: Standard, Easy-Load, High-Performance
  • Motor (watts): 150
  • Controller IP rating: IP 22
  • Motor IP rating: IP 34
  • Power (VAC): 90 to 130
  • Power (amps): 3
  • Controller Length (in): 9.75
  • Controller Width (in): 9.1875
  • Controller Height (in): 5.0625
  • Controller Length (mm): 248
  • Controller Width (mm): 233
  • Controller Height (mm): 129
  • Motor Length (in): 14.125
  • Motor Width (in): 5.5625
  • Motor Height (in): 6
  • Motor Length (mm): 359
  • Motor Width (mm): 141
  • Motor Height (mm): 152
  • Motor hp: 1/5
  • Description: I/P variable-speed modular digital drive, 20-650 rpm, 115V.