CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-
CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-CP Masterflex L/S Variable Speed Modular Drive w/Easy-Load III Head -Immaculate-
$620.00
New, without box. This system is turn-key and includes variable speed controller, pump drive, peristaltic pump head and cables. Higher volume system was required so this unit was shelved without use. Fully tested and works perfectly.

Includes the following:
  • Masterflex L/S variable speed modular drive system, 1 to 100 rpm
    • Pump 7553-80
    • Controller 7553-71
    • Included power and controller cables
  • Masterflex L/S Easy-Load® 3 Pump Head for Precision Tubing, CRS Rotor



Features:


The design of the Easy-Load® 3 features an automatic retention mechanism that makes loading and unloading tubing easier than ever. The spring-loaded occlusion lever opens the occlusion bed and simultaneously retracts the tubing retainers so that tubing slips right in. Close the lever and start the pump — the retainers automatically grip and hold the tubing securely in place.
The occlusion bed applies optimal occlusion force and the wide occlusion angle prevents fluid backflow up to the rated pressure of the tubing.
  • Flow range: 0.06 to 2300 mL/min depending on drive rpm and tubing size
  • Each pump head for precision pump tubing accepts all six precision tubing sizes — L/S® 13, L/S® 14, L/S® 16, L/S® 25, L/S® 17, and L/S® 18
  • Twist-lock mounting feature lets you mount and stack heads in seconds.
  • Included mounting plate adapts Easy-Load® 3 to L/S drives — locking tab secures pump head during operation in either direction
  • Polypropylene (PP) housing with CRS or SS rotor — CRS rotor is more economical while SS offers greater durability and chemical resistance.
  • Same side tubing entry/exit permits easy integration into space-limited applications — mount and operate pump head in any of four positions (depending on drive)
  • Stack up to four heads to increase flow capacity and for multiple-channel applications; see individual drive specifications for maximum number of heads to be mounted.