MDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port Manifold
MDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port ManifoldMDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port ManifoldMDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port ManifoldMDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port ManifoldMDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port ManifoldMDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port ManifoldMDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port ManifoldMDC Varian Stainless Steel High Vacuum Cross/Chamber CF250 Port Manifold
$1,500.00

Beautiful piece. Was marked for installation and may have been installed briefly but appears to have never been used. This high vacuum, SS304 vacuum chamber still has perfect knife edges and no apparent wear.

Measurements:

50.5" through the longest section, from one 4.5-inch CF63 port to the opposite CF63 port.
12.75" flange to flange between both 12" CF250 ports.
12.75" between the offset 10" CF200 ports.

The entire unit has the following flange ports:

Conflat Ports

  • Four (4x) 12" CF250 (DN250) Conflat flange ports
  • Two (2x) 10" CF200 (DN200) Conflat flange ports
  • Four (4x) 4.5" CF63 (DN63) Conflat flange ports
  • Three (3x) 2.75" CF40 (DN40) Conflat flange ports
Non-throughput Nipple Ports
  • Six (6x) 3/4" Nipples



Due to size and weight, this piece will be shipped via freight carrier on a pallet. Average shipping cost for a unit of this size/weight is ~$160. For accurate quote, please contact us.