Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-
Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-Sartorius Certomat BS-1 Heated Cabinet Incubator Shaker -Clean-
$1,400.00

Used but clean, tested and in great working condition. This is the CERTOMAT® BS-1 Cabinet-style incubator shaker. This unit has the optional cooling system installed but appears to need refrigeration service. The heating and shaking components function perfectly.

We ran several hours of testing on this unit. It performed admirably throughout. Control function was responsive. Heating was steady and precise. The system had no trouble holding 37°C for several hours without deviation. Thermostat matched that of our traceable thermometer. The shaker runs smoothly and very quietly.

The unit comes as shown, with no additional accessories. Please don't hesitate to inquire about shaker baskets as we often have them in stock.

Due to size and weight, this item will be shipped via freight carrier. Shipping cost in the lower 48 should be around $250. Please contact us for direct quote.



Manufacturer Description:

Three CERTOMAT® BS-1 incubation shaking cabinets can be stacked up and run independently each on its own program. Due to the adjustable mass compensation system there is no need to reduce shaking speed of the upper units – all units can be run with full load at top speed.   
  
Temperature, shaking speed and illumination can be defined and stored in five programs with four steps and one pre-step each. Safety features include visual and acoustic alarms, a memory function for automatic re-start after power failure, and recording of the time and duration of interruptions. An integrated spill tray prevents any liquid media from broken flasks from entering the mechanical system.   
  
The CERTOMAT® BS-1 is available with a choice of two shaking amplitudes and with or without integrated cooling. Further optional accessories are an illumination unit, a support frame and an additional incubation grid that can be mounted in the upper part of the cabinet. The interior of the incubation cabinet is completely made of polished stainless steel. IQ/OQ documents for use of the CERTOMAT® BS-1 in validated processes are available.

Features  

  • Interior dimensions (WxDxH): 89 x 65 x 49.5 cm
  • Orbital shaking amplitude: 25 mm
  • Stacking capability: Up to 3 units without speed reduction
  • Heating capacity: 650 W
  • Accuracy: Max. ±1 % of final value
  • Drive mechanism: Brushless motor with triple eccentric drive and adjustable mass compensation
  • Shaking speed: 40 - 400 rpm
  • Temperature range: + 8 - +70 °C
  • Air circulation: ca. 180 m³/h
  • Parameters: Speed, time, temperature, illumination (optional)
  • Timing: Date, hour, minute
  • Programs: up to 5 programs, with cycling
  • Memory: Restart after power failure
  • Alarms: Acoustic and visual
  • Steel construction with stainless steel interior


Specifications (Incubating + Cooling Model)

Max/Min Temperature 70 °C/5°C
Controls Digital
Max Shaking Speed 400 rpm
Orbital Diameter 25 mm
Shaking Speed 40-400 rpm
Shaker Type Refrigerated Shaker