Rane SR 2 Smart Remote for the RPM 88, RPM 44 and RPM 22 RW-485
Rane SR 2 Smart Remote for the RPM 88, RPM 44 and RPM 22 RW-485Rane SR 2 Smart Remote for the RPM 88, RPM 44 and RPM 22 RW-485Rane SR 2 Smart Remote for the RPM 88, RPM 44 and RPM 22 RW-485Rane SR 2 Smart Remote for the RPM 88, RPM 44 and RPM 22 RW-485Rane SR 2 Smart Remote for the RPM 88, RPM 44 and RPM 22 RW-485

Rane SR 2 Smart Remote for the RPM 88, RPM 44 and RPM 22 RW-485

$36.00

Clean and in good condition. These were removed from service during a system upgrade.

We have several with black or white faceplates. If you have a preference, let us know upon ordering.

Hassle-Free Warranty



Product Details

The SR 2 is a cost-effective, flexible remote control for Rane's RPM Programmable Multiprocessors. It features a 31-position LED indicator, rotary data encoder with an integrated push switch.

SR Configurator software (not included) sets up the SR 2 device. Due to the built-in push switch, the SR 2 can be used to control two parameters, "Level" and "Second Level." The encoder can be locked out by grounding the Encoder Lock terminal and enabling Auto-Lock in Drag Net software.

The SR 2 may be used in systems with SR 3 or SR 4 remotes where a display is not required.

Note:
Smart Remotes are primarily for use with RPM products. They can also be used with any host controller capable of implementing the RW-485 communications protocol.