Beckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + Warranty
Beckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + WarrantyBeckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + Warranty

Beckman Allegra-6 Centrifuge w/ GH-3.8A Rotor, Buckets, Adapters + Warranty

$800.00


Buy with confidence! This centrifuge is backed by our
Hassle-Free 60-DAY WARRANTY

Clean and in excellent condition as shown. Tested at several speeds, this centrifuge spun up smoothly and quickly during our extended run tests. Quiet and well behaved at all speeds, this unit maxed out at a stable 3600RPM and ran at that speed smoothly for 30 mins without issue.

All input controls worked as designed and all functions performed flawlessly. Cosmetically in beautiful condition. Interior chamber was clean and unblemished. Lid gasket and rubber boot around the motor shaft are supple, having been recently replaced.

Rotor, buckets and adapters were also in excellent condition. Comes as shown, with AC cord.

Hassle free warranty.


**DUE TO SIZE and WEIGHT, WE WILL BE SHIPPING THIS VIA FREIGHT CARRIER.**
The flat rate quote is based on commercial locations in the lower 48 with fork lift or loading dock onsite. If your location is not commercial, or you need lift-gate delivery, contact us for an updated quote.

If you'd prefer to ship with your own carrier, use the following info:
Ship weight: 180lbs
Dims: 40"W, 30"L, 24"H
Commercial Pickup location: 95403 | Forklift onsite



Technical Specifications

Height: 394 mm (15.5 in)
Width: 546 mm (21.5 in)
Depth: 660 mm (26 in)
Weight: 51.7 kg (114.0 lb)
Approximate Acceleration Time: 1 min
Approximate Deceleration Time: 3 min
Drive Type: Direct drive replaceable brushes
g Force: 5710
Max Speed: 6100 rpm
Maximum Heat Dissipation into Room under Steady-State Conditions: 0.9 kW (3701 Btu/hr)
Noise Level 1 Meter in Front of Centrifuge: < 60 dBA
Set Temperature: NA
Set Time: 30 min timer hold
Speed Control: ± 30 rpm of set speed
Nominal Cap: 4 x 750 mL

Compatible Rotors

Model Compatible Rotors
Beckman Allegra 6 Series 
 GH-3.8
PTS-2000
GH-4.7
GH-3.7
GA-6