Beckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - Warranty
Beckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - WarrantyBeckman Allegra 6R Refrigerated Centrifuge w/ GH-3.8A Rotor/Buckets - Warranty
$1,600.00


Buy with confidence! This centrifuge is backed by our
Hassle-Free 60-DAY WARRANTY

Clean and in excellent condition as shown. Tested at several speeds, this centrifuge spun up smoothly and quickly during our extended run tests. Quiet and well behaved at all speeds. Refrigeration brought the system down to -10°C at rest. 

All input controls worked as designed and all functions performed flawlessly. Our final test was running the centrifuge at 3500 RPM for 30mins with refrigeration at max. It handled the test perfectly, maintaining an operating temp of 0°C.

Cosmetically in beautiful condition. 
Interior chamber was clean and unblemished. Lid gasket and rubber boot around the motor shaft are supple, having been replaced within the last 2 years.

Rotor, buckets and adapters were also in excellent condition. Comes as shown, with AC cord.

Hassle free warranty.


**DUE TO SIZE and WEIGHT, WE WILL BE SHIPPING THIS VIA FREIGHT CARRIER.**
The flat rate quote is based on commercial locations in the lower 48 with fork lift or loading dock onsite. If your location is not commercial, or you need lift-gate delivery, contact us for an updated quote.

If you'd prefer to ship with your own carrier, use the following info:
Ship weight: 240lbs

Dims: 40"W, 30"L, 24"H
Commercial Pickup location: 95403 | Forklift onsite



Technical Specifications

Height: 394 mm (15.5 in)
Width: 546 mm (21.5 in)
Depth: 660 mm (26 in)
Weight: 51.7 kg (114.0 lb)
Approximate Acceleration Time: 1 min
Approximate Deceleration Time: 3 min
Drive Type: Direct drive replaceable brushes
g Force: 5710
Max Speed: 6100 rpm
Maximum Heat Dissipation into Room under Steady-State Conditions: 0.9 kW (3701 Btu/hr)
Noise Level 1 Meter in Front of Centrifuge: < 60 dBA
Set Temperature: NA
Set Time: 30 min timer hold
Speed Control: ± 30 rpm of set speed
Nominal Cap: 4 x 750 mL

Compatible Rotors

Model Compatible Rotors
Beckman Allegra 6 Series 
GH-3.8
PTS-2000
GH-4.7
GH-3.7
GA-6