Clean and in nice condition as shown in the photographs. These were pulled from a premiere state facility and were part of a regular maintenance program. Both units powered and all functions appear operational. We have a channel 1 and a channel 2 unit with matched remote SPO2 modules. There is one additional monitor but the selection wheel is wonky and the select button does not seem to work.
Both systems were tested with their respective SpO2 remote modules as shown. From our collection of Invivo systems, we had only 1 remaining remote battery and 1 power supply so this isn't really 2 ready-to-go systems.
Comes as shown with the following:
•2x Precess MRI Patient Monitors with WPU Carts (1x CH 1, 1x CH 2)
•1x Monitor Power Supply & Cable
•2x SPO2 Remote Modules (1x CH 1, 1x CH 2)
•1x Remote Battery
•Collection of accessories including 2x NPB hoses
Physical inspection:
•Screen was clear and bright
•Interface/menu operations functioned perfectly (except for selection wheel on standalone monitor as described)
•Reliable comms connections between modules, cart and monitor
Functions tested onsite:
•SpO2 sensor and module
•Printer
Monitor and cart batteries will likely need to be replaced. No warranty is offered or implied for batteries.
Flat rate freight is contingent on commercial address with either forklift or loading dock onsite. For addresses that do not meet these parameters, we may need to add additional shipping fees.
Product Details
Accurate, continuous, and reliable performance.
The INVIVO Precess MRI 3160 combines the latest wireless communication, radio frequency shielding, digital signal processing, and adaptable mounting technologies to assist technicians with monitoring patient vital signs.
The INVIVO Precess MRI Patient Monitoring System is available refurbished through Avante Animal Health. For more information, contact your Avante representative today.
Features
- Consists of a Wireless Processing Unit, Patient Connection Unit, Display Controller Unit, Wireless ECG Module, and a Wireless SpO2 Module.
- Allows simultaneous processing and display of up to eight parameters, six waveforms and associated numeric values.
- Eight hour battery life
- Wireless DCU monitor
- Color LCD display, 800 x 600 pixels
- Optional: CRD Printer with wireless remote printing.
Specifications
Power Requirements
- Operating Voltage Range: 100 to 240 VAC
- Frequency: 47 to 65 HZ
- Power Consumption, Maximum: < 100 Watts
Height
- Cart: 48.5 ± 0.5 inches
- CRD: 10.4 inches
- Wireless ECG module: 4.7 inches
- Wireless SpO2 module: 5.5 inches
Width
- Cart: 17.5 ± 0.5 inches
- CRD: 15.3 inches
- Wireless ECG module: 2.5 inches
- Wireless SpO2 module: 2.5 inches
Depth
- Cart: 17.5 ± 0.5 inches
- CRD: 4.6 inches
- Wireless ECG module: 0.91 inches
- Wireless SpO2 module: 0.91 inches
Weight
- Cart: 75 ± 0.5 lbs
- CRD: 20 lbs
- Wireless ECG module: 5.4 oz
- Wireless SpO2 module: 5.4 oz
