Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-
Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-Thermo Forma 310 Direct Heat CO2 Incubator, 184L -CO2/Temp Tested-
$900.00

Clean and in excellent condition. Heating, CO2 and temperature stability was tested over a 48 hour period. Heat was locked in stable. Display, interface, solenoid and alarms all functioned as designed. CO2 was generally stable though occasionally the displayed value would jump a couple percentage before settling back. 

Comes as shown with 2 shelves, humidity pan and power cable. 

**CO2 tank and regulator in photos were for testing only and not included.**

Hassle-free warranty.

*Unit requires freight shipping. Unless specified, we will utilize our standard carrier. Contact us for shipping quote.*



Manufacturer Description

The Thermo Forma 310 Direct Heat CO2 Incubator gives you excellent control over your samples within a compact space-saving footprint. This high-capacity incubator uses a thermal conductivity CO2 gas sensor to monitor your CO2 concentrations.  The Forma 310 is controlled by a microprocessor and gives users the ability to set and calibrate temperature, relative humidity, overtemperature, and CO2 levels through intuitive controls. Users can also configure their audio and visual alarm settings, which include low temperature, and CO2 level alarms, and for added security, an access code can be created, and contacts are available to configure a remote alarm system.

The Thermo Forma 310 Direct Heat CO2 Incubator is easy to maintain and clean and has a variety of contamination containment measures. This CO2 incubator comes with a HEPA Filter Airflow system, continuously filtering air within the chamber to refresh every 60 seconds. With the use of the HEPA2 VOC filter, volatile organic vapors are removed and copper components prevent bacterial and fungal growth.  Within the chamber, a polished stainless interior with coved corners facilitates easy clean-up, and sturdy stainless steel shelving can be quickly adjusted or removed to be cleaned without the use of tools. Lastly, the inner door gasket ensures a tight seal and prevents heat and CO2 loss while in operation. This incubator door gasket can be removed for cleansing as well.

 
Specifications

CO2 Concentration Range 0 to 20%
Humidity Delivery Water Pan
Relative Humidity >90% at 37°C
Temperature Range 5° above ambient to 50°C
Power 115v 60Hz 2.4A
CO2 Concentration Control Infrared
Ports 1.3 in. (3.3cm) with removable silicone plug, 0.25 in. barbed hose
Capacity 6.5 cu. ft.  (184L)
Shelf Material Stainless-steel
Shelves 5/Unit
Certifications/Compliance CE, UL, cUL
Dimensions (D x W x H) Interior Chambers 20 x 21.1 x 26.8 in. (50.8 x 54.1 x 68.1cm)
Dimensions (L x W x H) Exterior Stacked 24 x 26 x 38.5 in. (62.7 x 66.3 x 97.8 cm)
Cabinet Material Polished Stainless Steel