Categories

Clean, tested and fully functional. Tested over a 12-hour period with a traceable external thermometer, this system maintained very stable temps for the duration. Display, interface and heating all functioned beautifully. After servicing, this bath was left full for 48 hours to test for and leakage and was found to be water tight.
Interior bath surface is in excellent condition and was subjected to state decontamination prior to release. Additionally, underside tubing and drain valve were replaced onsite.
This is a 120V unit. Comes as shown with original power cable.
Hassle-free warranty.
Manufacturer Description
Key Features
-
Durable Construction: Made of heavy-duty stainless steel to resist corrosion and ensure long life.
-
Accurate PID Temperature Control: Features a thermostat dial for adjusting the water temperature.
-
Even Heating: The heating element is specifically designed to ensure the water (and thus the splinting material) heats evenly.
-
Drainage System: Includes a convenient drain and drain valve for easy water emptying.
-
Safety Features: Equipped with a grounded, hospital-grade plug and a high heat safety switch/overheating sensor that prevents the pan from heating over 200∘F (93.3∘C).
-
Lid: Comes with a hinged stainless steal lid with a handle designed to prevent burning user's hand.
Specifications
Specification | Details |
Product Type | Heated Splint Pan / Water Bath |
Model Number | HH-US-A (Also referred to as A426112 or SM-1501) |
Material | Stainless Steel (Inner Tank) |
Inside Dimensions (L x W x D) | 24.5′′×18.5′′×5′′ Deep (622mm×470mm×127mm Deep) |
Maximum Splint Sheet Size | Accommodates sheets up to 24′′×18′′ (61cm×46cm) |
Approximate Temperature Range | Low Setting: ≈140∘F (≈60∘C) |
High Setting: ≈190∘F (≈88∘C) | |
Overheating Shut-off | 200∘F (93.3∘C) |
Power (Standard US Model) | 100−120 Volts,50/60 Hz,13 Amps |
Usage | Used to heat and soften thermoplastic material for splint fabrication. |
- Brand: Patterson Medical
- Condition: Seller Refurbished
- Notes: Clean, excellent condition. 12 hour traceable temp tested. Hassle-free warranty.
- SKU: ST0038757
- Inspected By: 2
- Item ID: 38757
- Model: HH-US-A Rev 6
- Electrical Req: 100-120VAC | 50/60Hz